Remington 700 Receiver Short Action 308 Winchester Bolt Face with X-Mark Pro

The Anschutz target bolt action, which is used in this Anschutz 1710 HB AV SS hunting repeater, has dominated national and international competitions including the Olympic Games and the World Championships in the small bore rifle disciplines. The bolt movement, as with all Anschutz equipment, is extra ordinarily smooth and effortless. The bolt face is set back so that the rim of the cartridge is fully supported by the bolt head. The tried and tested arrangement of claw- extractor and cartridge holder ensures reliable case extraction. The one-piece firing pin has a defined end-stop area to prevent damage from dry firing. The receiver is equipped with an 0.43" wide, Anschutz Wave Style, V-block riflescope mounting dovetail rail. On some models there are additional drilled and tapped holes provided for scope mounting bases and rings. The independent bolt catch, mounted on the left side of the receiver, limits the movement of the bolt and protects the trigger. A gas vent hole on the side of the extractor groove directs the gas safely to the side in the event of cartridge failure. The sliding safety catch on the right hand side, a recent improvement, blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. This rifle features a 18" heavy stainless steel barrel threaded 1/2" x 28 tpi and Classic Walnut stock.

alert icon You must be 18 to purchase rifles or shotguns and 21 to purchase handguns, actions or receivers. All firearms must ship to a valid FFL Dealer and cannot be changed or cancelled after they are placed. If your order contains a handgun which ships from MidwayUSA, the handgun, and any additional firearms shipping from MidwayUSA on the same order, must ship Second Day Air. If your order does not contain a handgun which ships from MidwayUSA, any shotguns, rifles, actions or receivers shipping from MidwayUSA will ship via UPS Ground. The Supplier determines shipping methods for firearms which ship from a Supplier. Shipping charges for firearms are calculated separately from other products on your order and will incur a separate Per Order charge. Firearms cannot be returned to MidwayUSA; please contact the manufacturer for warranty claims. Firearms refused by the FFL Dealer or which cannot be transferred due to a failed background check will be subject to a 10% restocking fee. By ordering this firearm, you certify you are the actual transferee/buyer of the firearm, are of legal age and satisfy all Federal, State and local legal/regulatory requirements to purchase this firearm. Product Overview FIRST TIME BUYING A GUN ONLINE? Learn everything you need to make an informed purchase in our Definitive Guide for Buying Guns Online Read More The Anschutz target bolt action, which is used in this Anschutz 1712 AV hunting repeater, has dominated national and international competitions including the Olympic Games and the World Championships in the small bore rifle disciplines. The bolt movement, as with all Anschutz equipment, is extra ordinarily smooth and effortless. The bolt face is set back so that the rim of the cartridge is fully supported by the bolt head. The tried and tested arrangement of claw- extractor and cartridge holder ensures reliable case extraction. The one-piece firing pin has a defined end-stop area to prevent damage from dry firing. The receiver is equipped with an 0.43" wide, Anschutz Wave Style, V-block riflescope mounting dovetail rail. On some models there are additional drilled and tapped holes provided for scope mounting bases and rings. The independent bolt catch, mounted on the left side of the receiver, limits the movement of the bolt and protects the trigger. A gas vent hole on the side of the extractor groove directs the gas safely to the side in the event of cartridge failure. The sliding safety catch on the right hand side, a recent improvement, blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. The 1712 AV features an 18" medium-weight tapered barrel with 1/2" X 28 tpi threads.

Chambered for the straight-walled 450 Bushmaster cartridge, the Savage 110 Haymaker offers both precision and power for deer, bears and hogs. Its AccuFit system lets you easily tailor the length-of-pull and comb height for a perfect fit, while the user adjustable AccuTrigger offers a crisp, clean pull. Together with the AccuStock, with secures the action three-dimensionally along its entire length, the 110 Wolverine provides the fit and function of a custom rifle, right out of the box. It features a Magpul ACIS magazine, as well as an 18-inch carbon steel heavy barrel with a ported muzzle break and 11/16-24 threading. A one-piece 0 MOA rail mounted on the receiver makes it easy to set up the rifle to your unique needs.