Springfield Armory M1A Standard Issue Rifle California Compliant Semi-Automatic Centerfire Rifle

The Anschutz target bolt action, which is used in this Anschutz 1710 HB AV SS hunting repeater, has dominated national and international competitions including the Olympic Games and the World Championships in the small bore rifle disciplines. The bolt movement, as with all Anschutz equipment, is extra ordinarily smooth and effortless. The bolt face is set back so that the rim of the cartridge is fully supported by the bolt head. The tried and tested arrangement of claw- extractor and cartridge holder ensures reliable case extraction. The one-piece firing pin has a defined end-stop area to prevent damage from dry firing. The receiver is equipped with an 0.43" wide, Anschutz Wave Style, V-block riflescope mounting dovetail rail. On some models there are additional drilled and tapped holes provided for scope mounting bases and rings. The independent bolt catch, mounted on the left side of the receiver, limits the movement of the bolt and protects the trigger. A gas vent hole on the side of the extractor groove directs the gas safely to the side in the event of cartridge failure. The sliding safety catch on the right hand side, a recent improvement, blocks the trigger sear in the safe position and simultaneously lifts the trigger sear and bolt release latch. The bolt can also be opened in the safe position, allowing unloading the firearm with the safety engaged. This rifle features a 18" heavy stainless steel barrel threaded 1/2" x 28 tpi and Classic Walnut stock.

The M+M Industries M10X-Z-SH was born out of M+M's decision to examine the best engineered and battle-proven rifles from around the world. M+M took apart rifles and determined which parts of different weapon systems were necessary and which were not essential for function. From all of these parts, M+M built a rifle without all of the non-essential bolts, pins, springs, plates, and made a tool that helps to effectively and efficiently defend the family. The M10X offers serious shooters unprecedented accuracy, reliability, component interchangeability, and enduring value.

The LAR15 series of rifles from Rock River Arms are built with extremely tight tolerances and the highest quality components. Every LAR15 has the same receiver, but the differences are very apparent from there. The NM A4 is Rock River's take on the M16A4 platform. The NM A4 features a fixed A2 stock, removable carry handle, mil spec A2 hand guard, and the same feel as the A4. The similarities between this rifle and the A4 change from there. This rifle is equipped with a stainless steel, heavy, match barrel, two stage chrome match trigger, match rear sight, and more!